Download:

Hackrf One Software Windows
Hackrf One Software
Hackrf Tools Download Windows
Hackrf Firmware Update Windows

Hackrf One Software Windows

Reminder: If you use the USB DVB-T receiver SDR mode, do not install the drivers on the CD or installed automatically by Windows. Firmware HackRF One. The latest version of firmware for the HackRf One is available on Sourceforge.net or Github. For all information and technical documentation, a wiki is available. Software and firmware DV4mini.
. Run HackRF firmware in RAM via LPC DFU. This is used to 'unbrick' your HackRF, if you are no longer able to use HackRF tools to flash or operate your HackRF. Connect your HackRF One to a USB port on your computer. Hold down both the DFU and RESET buttons on the HackRF. Then release the RESET button (closest to the edge).
RTL SDR Setup for Windows 7 and 10 including HackRF Driver Setup. Additional notes on my blog: https://signalseverywhere.com/2018/11/30/1-how-to-install-driv.

You will need to build the HackRF library and tools on your Windows system. You will need libusb 2 and cmake 3, both of which are available for Windows, and a compiler such as MinGW. Instructions for building HackRF with MinGW are available 4, or for MSVC5 which should help with building the HackRF and osmocom tools6.

Windows: Download the latest version
Linux: read Installation section below

Features:

Optimized for only one purpose - to use HackRF as a spectrum analyzer
All changes in settings restart hackrf_sweep automatically
Easy retuning
Peak / Persistent display
Frequency allocation bands for EU / USA(partial)
High resolution waterfall plot
Spur filter - removes spur artifacts from the spectrum
hackrf_sweep integrated as a shared library

Requirements:

HackRF One with Firmware 2017.02.1 or newer (use linux inside virtual machine to update the firmware)

Installation:

Hackrf One Software

Make sure HackRF is using at least the minimum firmware version (see above)

Windows:

Windows 7+ x64 required
Install Java JRE 64bit v1.8+
Download the latest version of Spectrum Analyzer and unzip
Install HackRF as a libusb device
Download Zadig and run
Goto Options and check List All Devices
Find 'HackRF One' and select Driver 'WinUSB' and click install
Install (if you don't have one installed) Java JRE for Windows x64
Run 'hackrf_sweep_spectrum_analyzer_windows.cmd'

Linux:

To run, ensure these packages are installed (exact name depends on distro):
libusb-1.0 libfftw3 default-jdk
Newer openjdk might work also, not tested. On Ubuntu 18.04:
sudo apt install libusb-1.0 libfftw3-bin default-jdk
Follow the HackRF USB permissions setup - you have to add rules to udev to allow hackrf library to open the HackRF USB device, it does not work by default.

If something does not work, you can try to build it manually.

Building

Building native libraries for Windows (using mingw-w64) and linux is done in one unified build using Ubuntu 18.04 x64.

You'll need to install these packages:
sudo apt install build-essential ant git libusb-1.0 libfftw3-bin libfftw3-dev default-jdk mingw-w64
git clone --depth=1 https://github.com/pavsa/hackrf-spectrum-analyzer.git
cd hackrf-spectrum-analyzer/src/hackrf-sweep/
make
To run, simply execute: build/hackrf_sweep_spectrum_analyzer_linux.sh

Known issues:

Spectrum updates stop on parameter change
- Solution: press reset button on the HackRF (firmware bug)

License:

GPL v3

Hackrf Tools Download Windows

HackRF one with SDRangel under Windows 10 #windows

Hackrf Firmware Update Windows

#385

I installed SDR Console V3 and my HackRF One had be seen at the frist running. After that, I restarted my SDRangel and in the 'Select from list' my HackRF is present.
Now when I try to listen a frequency I have the following message 'Could not start sample source' .. An idea???

#386

I have the same problem exactly, but can not find any solution.
I have an idea that the firmware is old.
When did you buy your HackRF ?

#387

Met vriendelijke groet,
Kees van der Wal
+31654320919
http://www.linkedin.com/in/cvanderwal

#388

I didn't check the firmware and I don't know how to check it under Windows. The latest firmware version is 2018.01.1

#633

Found the same problem.
Also upgrade the firmware to 2018.01.1 (most recent ?)
Got the same error
anybody any clues ?

#636

Yes you must upgrade the firmware and the problem dissapears
Read the instructions 'how to update firmware'
Download Linux
Linux in USB stick or CD
Boot
Download the bin file (HackRF firmware)
Run the command to upgrade the firmware
Finish

#641

Thanks elfores,
Unfortunally, i did.
The firmware is upgraded to 2018.01.1
today i did it again to be shure and of course, no change.
Still get the 'could not start sample source'error
both the sdr# and sdr console v3 is working fine.
Perhaps i missed some driver or addon in the sdrangle software ?
hope someone can point me the right direction :-)

2021.03

Rca Universal Remote Rcr311w Code Search

Myanmar Fount Free Download

Sam Broadcaster Pro 2016

Download Welcome To My House Song Mp3

Hackrf One Windows Driver

Download Photoshop 9 Free Full Version

Rugrats Animal Rescue